This 6U 19″ rack module provides 125A of emergency stop switched power through four 32A three-phase Ceeform outlets.
All three-phase outlets are protected with an adjustable RCD. A single-phase auxiliary outlet is provided along with dual XLR7 data outputs for connection to Elevation1+ controllers.
The unit includes Transform 485 functionality providing an interface between Vector or K2 and Elevation v2.
The front panel features an integrated Emergency Stop button, status indicators, individual MCBs for each Ceeform outlet and an adjustable RCD. ‘Power Present’ status indicators are provided on both front and back panels.
Array PD-ES
-
Features
- Power distribution and emergency stop system contained in a 6U 19″ rack enclosure
- Single-phase auxiliary outlet
- 4 x 32A three-phase individually switched Ceeform outlets
- Adjustable RCD
- Integrated Emergency Stop Button
Mains Input/Output
- Powerlock or CamLok E1016 type single-pole connectors with through outlets
- 4 x 32A “Ceeform” type IEC60309 5-pole connectors
- 1 X 16A “Ceeform” type IEC60309 3-pole connector
- 1 x outlet suitable for local territory e.g. Schuko/Edison
Control Connections
- Ethercon for connection to Vector or K2
- 2 x XLR7 outputs
FAQ
-
03/12/2010
PD-ES units come with either a 9pin or a 22pin emergency stop connector. When using multiple units that have different connectors, an adapter cable needs to be used to link them together.
We offer two adapter cables to resolve this issue:
STP-00-0130 22 pin Socapex Female – 9 Pin FemaleSTP-00-0140 22 pin Socapex Male – 9 Pin Female
For further information on these cables or to order one please contact your nearest Kinesys distributor.
When using multiple Array PD-ES units, each one needs a unique IP address. This is set via the dip switches on the back of the unit, information on how to do this is here.
